ASME Sb163 N02200 Alloy 200 Nickel Alloy Seamless Tube for Heat Exchanger

• Customization: Available
• Application: Aviation, Electronics, Industrial, Medical, Chemical
• Standard: JIS, GB, DIN, BS, ASTM, AISI
• Model NO.: ASME SB163 N02200 Alloy 200
• Purity: 30~35%
• Alloy: Alloy
• Type: Nickel Pipe
• Powder: Not Powder
• Technique: Cold Drawn
• Surface Treatment: Annealed Pickled, Bright Annealed
• Section Shape: Round/Hollow
• Transport Package: Bundles/Wooden Box
• Specification: Alloy 200
• Trademark: GH-STEEL
• Origin: China
• HS Code: 7507120000
• Production Capacity: 1000ton Per Month

Product Description

Nickel Alloy 200 N02200 DIN 17751 2.4066 NA11 Ni 99,2 are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperature and excellent corrosion resistance, in particular hydroxides. Nickel 201 was a modification of 200 to control carbon (0.02 max) which keeps it from being embrittled by intergranular precipitate at temperature of 600ºF to 1400ºF. Typically, the elemental restrictions of both, Nickel Alloy 200 and nickel 201, dual-certified chemistry resulting in a single alloy with the desired characteristics of both alloys. 2.4066 Equal to Nickel Alloy 200.
Both ASTM B161 ASME SB 161 N02200 Alloy 200 and 201 offer corrosion resistance in reducing and neutral media as well as in oxidizing atmospheres provided that the oxidizing media allows the formation of a passive oxide film. This oxide film accounts for the materials excellent resistance in caustic environments. Corrosion rates in both marine and rural atmospheres are very low.

The resistance of ASTM B161 B163 ASME SB161 SB163 N02200 to corrosion by distilled and natural waters is excellent. Plus it also gives excellent service in flowing sea water even at high velocity, but in stagnant or very low-velocity seawater severe local attack may occur under fouling organisms or other deposits. In hot water systems where the steam contains carbon dioxide and air in certain proportions, corrosion rates will be initially high but will decrease with time if conditions favor the formation of a protective film.

Alloy 200 Standard:
DIN 17751 2.4066 DIN 17744 17750 17752 17753 2.4066
ASTM B161 B163 ASME SB161 SB163 N02200
BS 3072 3073 3074 3075 3076 NA11
Anticorrosion environment: Many kinds of organic solution/alkalinity liquids. Apply to the production soda water, the chlorine, the salty pedantry, the soap, Yuan wash the medicinal preparation, the food industry

ASTM B161 B163 ASME SB161 SB163 N02200 is normally limited to service at temperatures below 600 ºF. At higher temperature Nickel Alloy 200 products can suffer from graphitization which can result in severely compromised properties. When operating temperatures are expected to exceed 600ºF, carbon content becomes critical. The lower carbon content of Nickel 201 makes the material resistant to graphitization and therefore less subject to embrittlement. Nickel Alloy 200 & 201 are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel Alloy 200 is approved for service up to 600 ºF while Nickel 201 is approved for service up to 1230ºF. Melting point is 2615-2635 ºF.

ASTM B161 B163 ASME SB161 SB163 N02200 is unalloyed nickel with excellent corrosion resistance and excellent stability against alkaline media and good mechanical properties in a broad temperature range. Shows good corrosion resistance under reducing conditions, e.g. hydrochloric acid. Shows good stability under oxidizing conditions (by creating a surface protection film). Material 2.4066 (Nickel Alloy 200) is used in the chemical industry and petrochemical industry.

What are the Characteristics of Alloy 200 N02200?

Highly resistant to various reducing chemicals
Excellent resistance to caustic alkalies
High electrical conductivity
Excellent corrosion resistance to distilled and natural waters
Resistance to neutral and alkaline salt solutions
Excellent resistance to dry fluorine
Widely used to handle caustic soda
Good thermal, electrical and magnetostrictive properties
Offers some resistance to hydrochloric acids and sulfuric acids at modest temperatures and concentrations

ASTM B161 B163 ASME SB161 SB163 N02200 is normally limited to service at temperatures below 600 ºF. At higher temperatures Nickel Alloy 200 products can suffer from graphitization which can result in severely compromised properties. When operating temperatures are expected to exceed 600 ºF, carbon content becomes critical. The lower carbon content of Nickel 201 makes the material resistant to graphitization and therefore less subject to embrittlement. Nickel Alloy 200 & 201 are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel Alloy 200 is approved for service up to 600 ºF while Nickel 201 is approved for service up to 1230 ºF. Melting point is 2615-2635 ºF.
 

1. Material	Steel Grade	UNS N02200 Alloy 200
	Form	Round
	Standard	ASTM B163
2. Diameter of Stainless Pipe	W.T	1mm-10mm
	Diameter	20mm thru 219mm
	Length	2m-12m, or customer required
4. Application	Food processing equipment Marine and offshore engineering Salt production Caustic handling equipment Manufacture and handling of sodium hydroxide, particularly at temperatures above 300ºF Reactors and vessels in which fluorine is generated and reacted with hydrocarbons
5. Packing	*All of our nickel alloy seamless pipes and tubes are packaged according to international standards to prevent any possible damage or loss. By default, we will use thick woven plastic bags to bundle the finished pipes together in batches. For some special pipes and tubes that are vulnerable to dirt, scratches, stress, or rough handling, we will suggest using wooden cases for protection. Please note that wooden cases may incur extra costs not only for the case itself but also for increased freight costs, especially when using air transportation. To enhance customer experience, we also provide dedicated packaging according to your specific requirements."
6. Delivery Time	1.for ready stock :7 days after receiving the deposit of T/T 2.For MTO: 35 days after receiving the  deposit of T/T
7. Trade Terms	EXW,FOB, CFR, CIF etc.
8. Payment Terms	1.30%T/T in advance, the balance against the B/L copy 2.30%T/T in advance, the balance against the L/C at sight
9. Loading Port	Ningbo/Wenzhou/Shanghai

ASTM B163 200 / 201 Nickel Seamless Tubes Equivalent Grades 

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN	JIS	BS	GOST
Nickel 200	N02200	2.4066	N-100M	Ni 99.2	NW 2200	NA 11	НП-2
Nickel 201	N02201	2.4068	-	LC-Ni 99	NW 2201	NA 11	НП-2

Nickel UNS N02200 / N02201 Seamless Tubes Chemical Composition

Grade	Ni(min)	Fe(max)	Cu(max)	C(max)	Mn(max)	S(max)	Si(max)	Mg(max)	Ti(max)
Nickel Alloy 200	99.0	0.40	0.25	0.15	0.35	0.01	0.35
Nickel Alloy 201	99.0	0.40	0.25	0.02	0.35	0.01	0.35
DIN 17744 17750 17752 17753 2.4066	99.2	0.40	0.25	0.10	0.35	0.005	0.25	0.15	0.10

Nickel Alloy WERKSTOFF NR. 2.4066 / 2.4068 Seamless Tube Mechanical Properties

Grade	Density	Yield Strength (0.2%Offset)	Tensile Strength	Elongation	Melting Point
Nickel Alloy 200 / 201	8.9 g/cm3	Psi - 21500 , MPa - 148	Psi - 67000 , MPa - 462	45%	1446 °C (2635 °F)

 

SME SB 163 UNS N02200 Seamless Tube Outside Diameter & Wall Thickness Tolerance

Material	Nominal O.D., in. (mm)	Permissible Variations [Note(1)]
		O.D., in. (mm)		Wall Thk., %
				Avg Wall		Min. Wall
		+	-	+	-	+	-
UNS N02200, UNS N02201, and UNS N04400	1/2 to 5/8 (12.7 to 15.9),excl	0.005(0.13)	0	12.5	12.5	25	0
	8/5 to 1 1/2(15.9 to 38.1), incl	0.005(0.13)	0.005(0.13)	10	10	20	0
	Over 1 1/2 to 3(38.1 to 76.2), incl	0.010(0.25)	0.010(0.25)	10	10	22	0
UNS N06600, UNS N066090, UNS N06045, UNS N06025, UNS N08800, UNS N08810, UNS N08811, UNS N08801, and UNS N08825	1/2 to 5/8 (12.7 to 15.9), excl	0.005(0.13)	0.005(0.13)	12.5	12.5	25	0
	8/5 to 1 1/2 (15.9 to 38.1), incl	0.0075(0.19)	0.0075(0.19)	10	10	20	0
	Over 1 1/2 to 3 (38.1 to 76.2), incl	0.010(0.25)	0.010(0.25)	10	10	22	0

• Food processing equipment
• Marine and offshore engineering
• Salt production
• Caustic handling equipment
• Manufacture and handling of sodium hydroxide, particularly at temperatures above 300° F
• Reactors and vessels in which fluorine is generated and reacted with hydrocarbons
• Heat exchanger

Positive Material Identification (PMI)	Guohao Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications.
Testing	In some cases, HT/ET/UT testing of the stainless steel pipes may be required. We can assist you with this requirement.

 
Q1:How many countries you already exported ?
A1:Exported to more than 30 countries mainly from America, Russia, Ukraine, Vietnam, Egypt, Iran, Turkey, Mexico etc.
Q2:How can I get some samples?
A2:Small samples in store and can provide the samples for free. Catalogue is available, most patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q3:Do you have any MOQ limit for stainless steel products order? 
A3: MOQ, 1pc for ready stock of stainless steel seamless pipe. MOQ :1 tons for MTO.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. For mass products, ship freight is preferred.
Q5:How does your company do regarding quality control?
A5:Mill Test Certificate is supplied with shipment. If needed, a Third Party Inspection is acceptable or SGS.
Q6: Is it OK to print my logo on products??
A7: Yes. OEM and ODM are available for us.