Customization: | Available |
---|---|
Type: | Stainless Steel Pipes, Stainless Steel Pipes |
Standard: | ASTM, AISI, GB, DIN, EN, GOST9941, ASTM, AISI, GB, DIN, En, GOST9941 |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Type 316Ti Stainless Steel Tube is an improved corrosion resistant Chrome-Nickel steel alloy with high content of Molybdenum and Titanium. It is not a typical free machining grade and therefore not recommended for difficult high speed machining process.Grade 316Ti stainless steel has been traditionally specified by German engineers and users with the Werkstoff number 316Ti.The former steel grade in the UK was 320S31. 316Ti Stainless Steel Tubes is essentially a standard carbon 316 type with titanium stabilisation and is similar in principle to the titanium stabilisation of the 304 (1.4301) type to produce 321 (1.4541). The addition of titanium is made to reduce the risk of intergranular corrosion (IC) following heating in the temperature range 425-815C.The addition of titanium reduces the risk of IC since titanium carbo-nitrides are formed in preference to chromium carbides which has the effect of maintaining the correct distribution of chromium throughout the structure of the steel. The weldability of the 316Ti and 316L can be assumed to be similar. Neither of the grades can be expected to weld 'easier' or 'better' than-the-other. Niobium stabilised fillers (welding consumables) should be used for welding the 316Ti, especially where elevated temperature weld strength may be important. In other circumstances a '316L' filler should give a matching weld metal aqueous corrosion resistance to that of the 'parent' '316Ti' material.
Size Range:
Production |
Outside Diameter |
Wall Thickness |
Seamless Pipe |
6.00mm to 630mm |
1mm to 48mm |
Chemical Composition:
Grade |
C(max) |
Mn (max) |
Si(max) |
P(max) |
S(max) |
Cr |
Ni |
N(manx) | Ti | |
316
|
0.08 |
2.0 |
1.00 |
0.045 |
0.030 |
16.0-18.0 |
10.0--14.0 |
- | - | |
316L
|
0.035 |
2.0 |
1.00 |
0.045 |
0.030 |
16.0-18.0 |
10.0--14.0 |
- | - | |
316Ti
|
0.080 |
2.0 |
0.75 |
0.045 |
0.030 |
16.0-18.0 |
10.0--14.0 |
0.10 | 5(C+N)-0.70 |
Mechanical Properties:
Grade |
Tensile Strength(MPa) min |
Yield Strength 0.2% Proof (MPa) min |
Elongation (% in 50mm) min |
Hardness |
Rockwell B (HR B) max |
||||
316 |
515 |
205 |
35 |
90 |
316L |
485 |
170 |
35 |
90 |
316Ti |
515 |
205 |
35 |
90 |
Grade specifications:for 316 grade stainless steel
Grade | UNS No | Old British | Euronorm | Swedish SS |
Japanese JIS |
||
BS | En | No | Name | ||||
316 | S31600 | 316S31 | 58H, 58J | 1.4401 | X5CrNiMo17-12-2 | 2347 | SUS 316 |
316L | S31603 | 316S11 | - | 1.4404 | X2CrNiMo17-12-2 | 2348 | SUS 316L |
Norminal Pipe Size | Outside Diameter | Wall Thicknesses Schedule ANSI/ASME B36.10M,B36.19M | ||||||||||||||||
DN(in.) | D | sch5s | sch10s | sch10 | sch20 | sch30 | sch40s | STD | sch40 | sch60 | sch80s | XS | sch80 | sch100 | sch120 | sch140 | sch160 | XXS |
1/8 | 10.3 | --- | 1.24 | --- | --- | --- | 1.73 | 1.73 | 1.73 | --- | 2.41 | 2.41 | 2.41 | --- | --- | --- | --- | --- |
1/4 | 13.7 | --- | 1.65 | --- | --- | --- | 2.24 | 2.24 | 2.24 | --- | 3.02 | 3.02 | 3.02 | --- | --- | --- | --- | --- |
3/8 | 17.1 | --- | 1.65 | --- | --- | --- | 2.31 | 2.31 | 2.31 | --- | 3.2 | 3.2 | 3.2 | --- | --- | --- | --- | --- |
1/2 | 21.3 | 1.65 | 2.11 | --- | --- | --- | 2.77 | 2.77 | 2.77 | --- | 3.73 | 3.73 | 3.73 | --- | --- | --- | 4.78 | 7.47 |
3/4 | 26.7 | 1.65 | 2.11 | --- | --- | --- | 2.87 | 2.87 | 2.87 | --- | 3.91 | 3.91 | 3.91 | --- | --- | --- | 5.56 | 7.82 |
1 | 33.4 | 1.65 | 2.77 | --- | --- | --- | 3.38 | 3.38 | 3.38 | --- | 4.55 | 4.55 | 4.55 | --- | --- | --- | 6.35 | 9.09 |
1¼ | 42.2 | 1.65 | 2.77 | --- | --- | --- | 3.56 | 3.56 | 3.56 | --- | 4.85 | 4.85 | 4.85 | --- | --- | --- | 6.35 | 9.7 |
1½ | 48.3 | 1.65 | 2.77 | --- | --- | --- | 3.68 | 3.68 | 3.68 | --- | 5.08 | 5.08 | 5.08 | --- | --- | --- | 7.14 | 10.15 |
2 | 60.3 | 1.65 | 2.77 | --- | --- | --- | 3.91 | 3.91 | 3.91 | --- | 5.54 | 5.54 | 5.54 | --- | --- | --- | 8.74 | 11.07 |
2½ | 73 | 2.11 | 3.05 | --- | --- | --- | 5.16 | 5.16 | 5.16 | --- | 7.01 | 7.01 | 7.01 | --- | --- | --- | 9.53 | 14.02 |
3 | 88.9 | 2.11 | 3.05 | --- | --- | --- | 5.49 | 5.49 | 5.49 | --- | 7.62 | 7.62 | 7.62 | --- | --- | --- | 11.13 | 15.24 |
3½ | 101.6 | 2.11 | 3.05 | --- | --- | --- | 5.74 | 5.74 | 5.74 | --- | 8.08 | 8.08 | 8.08 | --- | --- | --- | --- | --- |
4 | 114.3 | 2.11 | 3.05 | --- | --- | --- | 6.02 | 6.02 | 6.02 | --- | 8.56 | 8.56 | 8.56 | --- | 11.13 | --- | 13.49 | 17.12 |
5 | 141.3 | 2.77 | 3.4 | --- | --- | --- | 6.55 | 6.55 | 6.55 | --- | 9.53 | 9.53 | 9.53 | --- | 12.7 | --- | 15.88 | 19.05 |
6 | 168.3 | 2.77 | 3.4 | --- | --- | --- | 7.11 | 7.11 | 7.11 | --- | 10.97 | 10.97 | 10.97 | --- | 14.27 | --- | 18.26 | 21.95 |
8 | 219.1 | 2.77 | 3.76 | --- | 7.04 | 8.18 | 8.18 | 8.18 | 10.31 | 12.7 | 12.7 | 12.7 | 15.09 | 18.26 | 20.62 | 23.01 | 22.23 | |
10 | 273.1 | 3.4 | 4.19 | --- | 6.35 | 7.8 | 9.27 | 9.27 | 9.27 | 12.7 | 12.7 | 12.7 | 15.09 | 18.26 | 25.4 | 28.58 | 25.4 | |
12 | 323.9 | 3.96 | 4.57 | --- | 6.35 | 8.38 | 9.53 | 9.53 | 10.31 | 14.27 | 12.7 | 12.7 | 17.48 | 21.44 | 25.4 | 28.58 | 33.32 | 25.4 |
14 | 355.6 | 3.96 | 4.78 | 6.35 | 7.92 | 9.53 | --- | 9.53 | 11.13 | 15.09 | --- | 12.7 | 19.05 | 23.83 | 27.79 | 31.75 | 35.71 | |
16 | 406.4 | 4.19 | 4.78 | 6.35 | 7.92 | 9.53 | --- | 9.53 | 12.7 | 16.66 | --- | 12.7 | 21.44 | 26.19 | 30.96 | 36.53 | 40.49 | |
18 | 457.2 | 4.19 | 4.78 | 6.35 | 7.92 | 11.13 | --- | 9.53 | 14.27 | 19.05 | --- | 12.7 | 23.83 | 29.36 | 34.93 | 39.67 | 45.24 | |
20 | 508 | 4.78 | 5.54 | 6.35 | 9.53 | 12.7 | --- | 9.53 | 15.09 | 20.62 | --- | 12.7 | 26.19 | 32.54 | 38.1 | 44.45 | 50.01 | |
22 | 558.8 | 4.78 | 5.54 | 6.35 | 9.53 | 12.7 | --- | 9.53 | --- | 22.23 | --- | 12.7 | 28.58 | 34.93 | 41.28 | 47.63 | 53.98 | |
24 | 609.6 | 5.54 | 6.35 | 6.35 | 9.53 | 14.27 | --- | 9.53 | 17.48 | 24.61 | --- | 12.7 | 30.96 | 38.89 | 46.02 | 52.37 | 59.54 | |
26 | 660.4 | --- | --- | 7.92 | 12.7 | --- | --- | 9.53 | --- | --- | --- | 12.7 | ||||||
28 | 711.2 | --- | --- | 7.92 | 12.7 | 15.88 | --- | 9.53 | --- | --- | --- | 12.7 | ||||||
30 | 762 | 6.35 | 7.92 | 7.92 | 12.7 | 15.88 | --- | 9.53 | --- | --- | --- | 12.7 | ||||||
32 | 812.8 | --- | --- | 7.92 | 12.7 | 15.88 | 17.48 | 9.53 | 17.48 | --- | --- | 12.7 | ||||||
34 | 863.6 | --- | --- | 7.92 | 12.7 | 15.88 | 17.48 | 9.53 | 17.48 | --- | --- | 12.7 | ||||||
36 | 914.4 | --- | --- | 7.92 | 12.7 | 15.88 | 19.05 | 9.53 | 19.05 | --- | --- | 12.7 | ||||||
38 | 965.2 | --- | --- | --- | --- | --- | --- | 9.53 | --- | --- | --- | 12.7 | Note: sch5s,10s,40s,80s Used for steel pipe fittings | |||||
40 | 1016 | --- | --- | --- | --- | --- | --- | 9.53 | --- | --- | --- | 12.7 | ||||||
42 | 1066.8 | --- | --- | --- | --- | --- | --- | 9.53 | --- | --- | --- | 12.7 | ||||||
44 | 1117.6 | --- | --- | --- | --- | --- | --- | 9.53 | --- | --- | --- | 12.7 | ||||||
46 | 1168.4 | --- | --- | --- | --- | --- | --- | 9.53 | --- | --- | --- | 12.7 | ||||||
48 | 1219.2 | --- | --- | --- | --- | --- | --- | 9.53 | --- | --- | --- | 12.7 |
Summary | Standards |
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | ASTM A213 |
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | ASTM A249 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service | ASTM A269 |
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | ASTM A312 |
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications | ASTM A409 |
Standard Specification For Seamless Stainless Steel Mechanical Tubing | ASTM A511 |
NPS Designator | Tolerance, % from Nominal | |
Over | Under | |
⅛ to 2½ incl., all t/D ratios | 20.0 | 12.5 |
3 to 18 incl., t/D up to 5% incl. | 22.5 | 12.5 |
3 to 18 incl., t/D > 5% | 15.0 | 12.5 |
20 and larger, welded, all t/D ratios | 17.5 | 12.5 |
20 and larger, seamless, t/D up to 5% incl. | 22.5 | 12.5 |
20 and larger, seamless, t/D > 5% | 15.0 | 12.5 |
NPS [DN] Designator | Tolerance in %, from specified | |
Over | Under | |
⅛ to 2½ [6 to 65] incl., all t/D ratios | 20 | 12.5 |
Above 2½ [65], incl, t/D ≤ 5% | 22.5 | 12.5 |
Above 2½ [65], incl, t/D > 5% | 15 | 12.5 |
No. | Size, Outside Diameter, in. | Permissible Variations in Outside Diameter, in. (mm) | Permissible Variations in Wall Thickness, % | Permissible Variations in Cut Length, in. (mm) | Thin Walled Tubes | |
Over | Under | |||||
1 | Up to ½ | ±0.005(0.13) | ±15 | ⅛(3.2) | 0 | ... |
2 | ½ to 1½, excl | ±0.005(0.13) | ±10 | ⅛(3.2) | 0 | less than 0.065 in. (1.65 mm) nominal |
3 | 1½ to 3½, excl | ±0.010(0.25) | ±10 | 3/16(4.8) | 0 | less than 0.095 in. (2.41 mm) nominal |
4 | 3½ to 5½, excl | ±0.015(0.38) | ±10 | 3/16(4.8) | 0 | less than 0.150 in. (3.81 mm) nominal |
5 | 5½ to 8, excl | ±0.030(0.76) | ±10 | 3/16(4.8) | 0 | less than 0.150 in. (3.81 mm) nominal |
6 | 8 to 12, excl | ±0.040(1.01) | ±10 | 3/16(4.8) | 0 | less than 0.200 in. (5.08 mm) nominal |
7 | 12 to 14, excl | ±0.050(1.26) | ±10 | 3/16(4.8) | 0 | less than 0.220 in. (5.59 mm) nominal |
1.Q: Do you provide customized product services?
A: Of course, we can design and produce the products you need based on your specifications and drawings. For example: special dimensions, special controls, OEM, etc.
2.Q: Are you a manufacturer or trader?
A: We are manufacturers. We have our own factory to produce and process various kinds of stainless steel /nickel alloy pipes.
3.Q: Can we get the some samples?Is there a charge?
A: Yes, we will provide you with the samples you want. The samples are free of charge, but the customer may have to pay the freight.
4.Q: Can we visit your factory?
A: Of course, we welcome you to visit our factory on-site or visit our production line through online videos to learn more about our strength and quality. Once we have your schedule, we will arrange a professional sales team to follow up with you.
5.Q: How do you ensure the quality of the product?
A: All products must undergo three inspections throughout the entire manufacturing process, including production, cutting, and packaging. The factory inspection report is provided with the goods. If necessary, third-party inspections such as SGS can be accepted.
6.Q: What is your delivery time?
A: Different products and procurement quantities have different delivery times. The product will be delivered as soon as possible on the basis of quality assurance. Usually, if the goods are in stock, it takes 3-10 days. Alternatively, if the goods are out of stock, it will take 25 to 45 days.
7.Q: Can you arrange shipment?
A: Of course, we have freight forwarders who have been cooperating for many years. We are VIP and can provide you with the most favorable prices and professional services.
8.Q: What if I don't have import experience?
A: We have rich export experience. As long as you have an import license, please leave the rest to us! We will help you choose the most suitable transportation service to safely and accurately deliver the product to the place where it is needed.