| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Medical, Chemical |
| Standard: | JIS, GB, DIN, BS, ASTM, AISI |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. The high nickel and molybdenum contents make the nickel steel alloy especially resistant to pitting and crevice corrosion in reducing environments while chromium conveys resistance to oxidizing media. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures. This nickel alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process application in an as welded condition.
ASTM B622 C276 (N10276) is a specification for seamless tubes and pipes made of nickel-molybdenum-chromium alloy (C276) that are commonly used in heat exchangers and boilers. The DIN 2.4819 refers to the European standard for this alloy.
This seamless tube/pipe is known for its excellent corrosion resistance in a wide range of environments, including highly corrosive conditions such as acidic solutions and chloride-containing media. It also offers good mechanical properties and high temperature resistance.
| 1. Material | Steel Grade | HASTELLOY: C276(N10276) |
| Production Process | Available in cold rolled and cold drawn | |
| Standard | ASTM B622 / ASME SB622 | |
| 2. Diameter of Stainless Pipe | W.T | 1mm-10mm |
| Diameter | 20mm thru 219mm | |
| Length | 2m-12m, or customer required | |
| 4. Application |
|
|
| 5. Packing | *All of our nickel alloy seamless pipes and tubes are packaged according to international standards to prevent any possible damage or loss. By default, we will use thick woven plastic bags to bundle the finished pipes together in batches. For some special pipes and tubes that are vulnerable to dirt, scratches, stress, or rough handling, we will suggest using wooden cases for protection. Please note that wooden cases may incur extra costs not only for the case itself but also for increased freight costs, especially when using air transportation. To enhance customer experience, we also provide dedicated packaging according to your specific requirements." |
|
| 6. Delivery Time | 1.for ready stock :7 days after receiving the deposit of T/T 2.For MTO: 35 days after receiving the deposit of T/T |
|
| 7. Trade Terms | EXW,FOB, CFR, CIF etc. | |
| 8. Payment Terms | 1.30%T/T in advance, the balance against the B/L copy 2.30%T/T in advance, the balance against the L/C at sight |
|
| 9. Loading Port | Ningbo/Wenzhou/Shanghai | |
| STANDARD | UNS | WNR. | AFNOR | EN | JIS | OR | GOST |
| Hastelloy C276 | N10276 | 2.4819 | - | NiMo16Cr15W | NW 0276 | ЭП760 | ХН65МВУ |
| Grade | Ni | Cr | Mo | Fe | W | C | Si | Co | Mn | V | P | S |
| Hastelloy C276 N10276 |
Balance | 14.5~16.5 | 15.0~17.0 | 4.0~7.0 | 3.0~4.5 | 0.010 max | 0.08 max | 2.5 max | 1.0 max | 0.35 max | 0.04 max | 0.03 max |
| Elongation | (00.2%Offset) Yield Strength | Melting Point | Density | Tensile Strength |
| 40% | MPa - 355, Psi - 52,000 | (2500 °F) 1370 °C | 8.89 g/cm3 | MPa - 790, Psi (1,15,000) |
| Density | 8.87gcm3 |
| Melting point | 1325-1370oC |
| Pipe Schedules | ||||
| Nominal Pipe Size, in. | Outside Diameter | Nominal Wall Thickness | ||
| Schedule No. 10 | Schedule No. 40 | Schedule No. 80 | ||
| Inches | ||||
| 1⁄4 | 0.54 | 0.065 | 0.088 | ... |
| 3⁄8 | 0.675 | 0.065 | 0.091 | 0.126 |
| 1⁄2 | 0.84 | 0.083 | 0.109 | 0.147 |
| 3⁄4 | 1.05 | 0.083 | 0.113 | 0.154 |
| 1 | 1.315 | 0.109 | 0.133 | 0.179 |
| 1-1⁄4 | 1.66 | 0.109 | 0.14 | 0.191 |
| 1-1⁄2 | 1.9 | 0.109 | 0.145 | 0.2 |
| 2 | 2.375 | 0.109 | 0.154 | 0.218 |
| 2-1⁄2 | 2.875 | 0.12 | 0.203 | 0.276 |
| 3 | 3.5 | 0.12 | 0.216 | 0.3 |
| Millimetres | ||||
| 1⁄4 | 13.72 | 1.65 | 2.24 | ... |
| 3⁄8 | 17.14 | 1.65 | 2.31 | 3.2 |
| 1⁄2 | 21.34 | 2.11 | 2.77 | 3.73 |
| 3⁄4 | 26.67 | 2.11 | 2.87 | 3.91 |
| 1 | 33.4 | 2.77 | 3.38 | 4.55 |
| 1-1⁄4 | 42.16 | 2.77 | 3.56 | 4.85 |
| 1-1⁄2 | 48.26 | 2.77 | 3.68 | 5.08 |
| 2 | 60.32 | 2.77 | 3.91 | 5.54 |
| 2-1⁄2 | 73.02 | 3.05 | 5.16 | 7.04 |
| 3 | 88.9 | 3.05 | 5.49 | 7.62 |
| Permissible Variations for Outside Diameter and Wall Thickness of Seamless Cold-Worked Pipe and Tube | ||||||
| Nominal Outside Diameter, | Permissible Variations | Thickness of Specified Minimum Wall, % | ||||
| in. (mm) | Outside Diameter, | Thickness of | Plus | Minus | ||
| in. (mm) | Specified | |||||
| Nominal Wall, % | ||||||
| Plus | Minus | Plus | Minus | |||
| Over 0.400 (10) to 5/8 (16), excl | 0.005 (0.13) | 0.005 (0.13) | 15 | 15 | 30 | 0 |
| 5/8 (16) to 1 1/2 (38), incl | 0.0075 (0.19) | 0.0075 (0.19) | 10 | 10 | 22 | 0 |
| Over 1 1/2 (38) to 3 (76), incl | 0.010 (0.25) | 0.010 (0.25) | 10 | 10 | 22 | 0 |
| Over 3 (76) to 4 1/2 (114), incl | 0.015 (0.38) | 0.015 (0.38) | 10 | 10 | 22 | 0 |
| Over 4 1/2 (114) to 6 (152), incl | 0.020 (0.51) | 0.020 (0.51) | 12.5 | 12.5 | 28 | 0 |
| Over 6 (152) to 6 5/8 (168), incl | 0.025 (0.64) | 0.025 (0.64) | 12.5 | 12.5 | 28 | 0 |
| Over 6 5/8 (168) to 8 5/8 (219), incl | 0.031 (0.79) | 0.031 (0.79) | 12.5 | 12.5 | 28 | 0 |
| Over 8.625 (219) to 14 (356), incl | 0.062 (1.57) | 0.031 (0.79) | 15 | 12.5 | 30 | 0 |
| Over 14 (356) to 24 (610), incl | 0.125 (3.18) | 0.031 (0.79) | 15 | 12.5 | 30 | 0 |
| Permissible Variations for Outside Diameter and Wall Thickness of Hot-Finished Tube | ||||||
| Nominal Outsider Diameter, | Permissible Variations | |||||
| in. (mm) | Outside Diameter or Inside | % of Thickness of Specified | % of Thickness of Specific | |||
| Diameter, in. (mm) | Nominal Wall | Minimum Wall | ||||
| + | - | + | - | + | - | |
| 3/4 (19) to 1 1/2 (38), incl | 0.015 (0.4) | 0.031 (0.8) | 12.5 | 12.5 | 28.5 | 0 |
| Over 1 1/2 (38.1) to 4 (102), incl | 0.031 (0.8) | 0.031 (0.8) | 12.5 | 12.5 | 28.5 | 0 |
| Over 4 (102) to 9 1/4 (235), incl | 0.062 (1.6) | 0.031 (0.8) | 12.5 | 12.5 | 28.5 | 0 |
| Permissible Variations for Outside Diameter and Wall Thickness of Seamless Hot-Worked Pipe | ||||||
| Nominal Outsider Diameter, | Permissible Variations | |||||
| in. (mm) | Outside Diameter, | Thickness of Specified | Thickness of Specified | |||
| in. (mm) | Nominal Wall, % | Minimal Wall, % | ||||
| Plus | Minus | Plus | Minus | Plus | Minus | |
| 1 (25) to 1.900 (48), incl | 0.015 (0.40) | 0.031 (0.79) | 16 | 12.5 | 28.5 | 0 |
| over 1.900 (48) to 4 1/2 (114), incl | 0.031 (0.79) | 0.031 (0.79) | 16 | 12.5 | 28.5 | 0 |
| over 4 1/2 (114) to 6 1/2 (165), incl | 0.047 (1.2) | 0.047 (1.2) | 16 | 12.5 | 28.5 | 0 |
| over 6 1/2 (165) to 9 1/4 (235), incl | 0.062 (1.6) | 0.062 (1.6) | 16 | 12.5 | 28.5 | 0 |
| Permissible Variations in Length | ||
| Outside Diameter, in. (mm) | Cut Length, in. (mm) | |
| Over | Under | |
| Under 2 (50.8) | 1/8 (3.2) | 0 |
| 2 (50.8) and over | 3/16 (4.8) | 0 |
| Positive Material Identification (PMI) | Guohao Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications. |
| Testing | In some cases, HT/ET/UT testing of the stainless steel pipes may be required. We can assist you with this requirement. |
){kind=link}