| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Medical, Chemical |
| Standard: | JIS, GB, DIN, BS, ASTM, AISI |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Incoloy 825 is one of the most effective alloy choice for severe environments. Its usefulness in varying climate, especially with regards to general and local corrosion makes the Incoloy WERKSTOFF NR. 2.4858 Pipe in industries such as - chemical processing, pickling operations, pollution control, acid production, nuclear fuel reprocessing, as well as the handling of radioactive wastes. According to most Incoloy 825 Seamless Pipe manufacturer, the industry that reaps the benefits of this alloy is the oil and gas industry, where they are useful in the recovery, extraction and conveyance of media across.
| 1. Material | Steel Grade | INCONEL: 600(N06600),601( N06601), 625( N06625),718(N07718),X-750(N07750) INCOLOY: 800(N08800), 800H(N08810),800HT(N08811),825(N08825),926(N08926), A-286(S66286),20(N08020),200(N02200),201(N02201) HASTELLOY: C-22(N06022),C276(N10276),B-2(N10665) Monel : 400(N04400),K-500(N05500) High Temperature Alloy: GH3030,GH3039,Cr20Ni80 |
| Production Process | Available in cold rolled and cold drawn | |
| Standard | ASTM B163, B167, B168, B407, B423, B444, B622, B677, B829 | |
| 2. Diameter of Stainless Pipe | W.T | 1mm-10mm |
| Diameter | 20mm thru 219mm | |
| Length | 2m-12m, or customer required | |
| 4. Application |
|
|
| 5. Packing | *All of our nickel alloy seamless pipes and tubes are packaged according to international standards to prevent any possible damage or loss. By default, we will use thick woven plastic bags to bundle the finished pipes together in batches. For some special pipes and tubes that are vulnerable to dirt, scratches, stress, or rough handling, we will suggest using wooden cases for protection. Please note that wooden cases may incur extra costs not only for the case itself but also for increased freight costs, especially when using air transportation. To enhance customer experience, we also provide dedicated packaging according to your specific requirements." |
|
| 6. Delivery Time | 1.for ready stock :7 days after receiving the deposit of T/T 2.For MTO: 35 days after receiving the deposit of T/T |
|
| 7. Trade Terms | EXW,FOB, CFR, CIF etc. | |
| 8. Payment Terms | 1.30%T/T in advance, the balance against the B/L copy 2.30%T/T in advance, the balance against the L/C at sight |
|
| 9. Loading Port | Ningbo/Wenzhou/Shanghai | |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
| Grade | Ni | C | Cu | Mn | Si | Cr | Fe | S | Al | Ti | |
| Inconel 825 | Min. | 38 | - | 1.5 | - | - | 19.5 | 22.0 | - | - | 0.6 |
| Max. | 46 | 0.05 | 3 | 1 | 0.5 | 23.5 | - | 0.03 | 0.2 | 1.2 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi - 80,000 , MPa - 550 | Psi - 32,000 , MPa - 220 | 30% |
| Permissible Variation | ||||
| Specified or Calculated Nominal Outside Diameter | Outside Diameter or Inside Diameter | Wall Thickness,% | ||
| + | - | + | - | |
| Cold -Finished Pipes and Tubes, (Inches) | ||||
| 0.500 to 5⁄8, excl | 0.005 | 0.005 | 15 | 15 |
| 5⁄8 to 11⁄2, incl | 0.0075 | 0.0075 | 10 | 10 |
| Over 1 1⁄2 to 3 1⁄2, incl | 0.01 | 0.01 | 10 | 10 |
| Over 3 1⁄2 to 4 1⁄2, incl | 0.015 | 0.015 | 10 | 10 |
| Over 4 1⁄2 to 6, incl | 0.02 | 0.02 | 12.5 | 12.5 |
| Over 6 to 6 5⁄8, incl | 0.025 | 0.025 | 12.5 | 12.5 |
| Millimeters | ||||
| 12.7 to 15.8, excl | 0.127 | 0.127 | 15 | 15 |
| 15.8 to 38.1, incl | 0.19 | 0.19 | 10 | 10 |
| Over 38.1 to 88.9, incl | 0.254 | 0.254 | 10 | 10 |
| Over 88.9 to 114.3, incl | 0.381 | 0.381 | 10 | 10 |
| Over 114.3 to 152.4, incl | 0.508 | 0.508 | 12.5 | 12.5 |
| Over 152.4 to 168.3, incl | 0.635 | 0.635 | 12.5 | 12.5 |
| Hot-Finished Tube, (Inches) | ||||
| 2 1⁄2 to 5 1⁄2, excl | 0.031 | 0.031 | 12.5 | 12.5 |
| 5 1⁄2 to 9 1⁄4, incl | 0.047 | 0.047 | 12.5 | 12.5 |
| Millimeters | ||||
| 63.5 to 139.7, excl | 0.787 | 0.787 | 12.5 | 12.5 |
| 139.7 to 234.9, incl | 1.19 | 1.19 | 12.5 | 12.5 |
| Positive Material Identification (PMI) | Guohao Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications. |
| Testing | In some cases, HT/ET/UT testing of the stainless steel pipes may be required. We can assist you with this requirement. |
){kind=link}