| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Medical, Chemical |
| Standard: | JIS, GB, DIN, BS, ASTM, AISI |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Monel 400 is a nickel-copper alloy. It contains about 30% copper and 70% nickel. The combination of these two components gives Monel 400 excellent corrosion resistance. This corrosion resistance offers unique advantages in flowing seawater.
| 1. Material | Steel Grade | Monel 400 |
| Production Process | Available in cold rolled and cold drawn | |
| Standard | ASTM B163 / ASME SB163 Standard Specifications for seamless nickel and nickel alloy condensers and heat-exchanger tubes ASTM B165 / ASME SB165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube |
|
| 2. Diameter of Stainless Pipe | W.T | 1mm-10mm |
| Diameter | 20mm thru 630mm | |
| Length | 2m-20m, or customer required | |
| 4. Application |
|
|
| 5. Packing | *All of our nickel alloy seamless pipes and tubes are packaged according to international standards to prevent any possible damage or loss. By default, we will use thick woven plastic bags to bundle the finished pipes together in batches. For some special pipes and tubes that are vulnerable to dirt, scratches, stress, or rough handling, we will suggest using wooden cases for protection. Please note that wooden cases may incur extra costs not only for the case itself but also for increased freight costs, especially when using air transportation. To enhance customer experience, we also provide dedicated packaging according to your specific requirements." |
|
| 6. Delivery Time | 1.for ready stock :7 days after receiving the deposit of T/T 2.For MTO: 35 days after receiving the deposit of T/T |
|
| 7. Trade Terms | EXW,FOB, CFR, CIF etc. | |
| 8. Payment Terms | 1.30%T/T in advance, the balance against the B/L copy 2.30%T/T in advance, the balance against the L/C at sight |
|
| 9. Loading Port | Ningbo/Wenzhou/Shanghai | |
| C | Ni | Mn | Fe | S | Si | Cu | |
| MIN | - | 63.0 | - | - | - | - | 28.0 |
| MAX | 0.030 | 2.00 | 2.5 | 0.024 | 0.50 | 34.0 |
| Density | 8.8 g/cm3 |
| Melting | 1350-1350ºC |
| Condition & Size | Tensile Strength | Yield Strength | Elongation | Reduction of Area | Hardness |
| (0.2% Offset) | |||||
| MPa, min | MPa, min | %, min | %, min | Rockwell B, max | |
| Annealed / 5 in. (127 mm) outside diameter and under | 480 | 195 | 35 | ... | ... |
| Annealed / Over 5 in. (127 mm) outside diameter | 480 | 170 | 35 | ... | ... |
| Stress Relieved / 5 in. (127 mm) outside diameter and under | 585 | 380 | 15 | ... | ... |
| Permissible Variations | ||||||
| Nominal Outside Diameter, in.(mm) | Outside Diameter, in.(mm) | % of Thickness of Specified Nominal Wall | % of Thickness of Specified Minimum Wall | |||
| + | - | + | - | + | - | |
| Wver 0.400(10) to 5/8 (16), excl | 0.005(0.13) | 0.005(0.13) | 15 | 15 | 30 | 0 |
| 5/8(16) to q 1/2 (38), incl | 0.0075(0.19) | 0.0075(0.19) | 10 | 10 | 22 | 0 |
| Over 1 1/2(38) to 3(76), incl | 0.010(0.25) | 0.010(0.25) | 10 | 10 | 22 | 0 |
| Over 3(76) to 4 1/2(114), incl | 0.015(0.38) | 0.015(0.38) | 10 | 10 | 22 | 0 |
| Over 4 1/2(114) to 6(152), incl | 0.020(0.51) | 0.020(0.51) | 12.5 | 12.5 | 28 | 0 |
| Over 6(152) to 6 5/8(168), incl | 0.025(0.64) | 0.025(0.64) | 12.5 | 12.5 | 28 | 0 |
| Over 6 5/8(168) to 8 5/8(219), incl | 0.031(0.79) | 0.031(0.79) | 12.5 | 12.5 | 28 | 0 |
| Ovality- The permissible variations in this table apply to individual measurements, including out-of-roudness(ovality) except for the following: For pipe and tube having a nominal wall thickness of 3% or less of the nominal otside diametter, the mean uotside diameter shall conform to the permissible variations of this table and individual measruements(including ovality) shall conform to the plus and minus values of the tale, with the values increased by 0.5% of the nominal outside diameter. fo peipe and tube over4 1/2in.(114mm) in outside diameter with a nominal wall thickness greater than 3% of the nominal outside diameter, the mean outside diameter shall conform to the permissible variations of this table and individual measurements shall not exceed twice the permissible variations of the table.BEccentricity- The permissible variations in tihis table apply to individual measurements including eccentricity. |
||||||
| ASTMSTANDARD | UNS NO. | KOREA/JAPANES | GERMAN | BRITISH | ISO | ||||
| KS/JIS Symbol | KS/JIS Numbe | DIN Type | DIN Number | B.S Number | B.S Grade | ISO Type | ISO Number | ||
| B 165 Nikel-Copper Alloy (UNSN04400) Seamless Pipe and Tube | |||||||||
| N04400 | N04400 | /NCuT | /H4552 | NW4400 | 17742 | 3074 | NA12 | 9722 |
| Positive Material Identification (PMI) | Guohao Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications. |
| Testing | In some cases, HT/ET/UT testing of the stainless steel pipes may be required. We can assist you with this requirement. |
){kind=link}