ASTM A312 UNS31254/ 1.4547/ 6 Mo/ 254Mo Seamless Steel Pipe for Saltwater handling

• Customization: Available
• Type: Stainless Steel Pipes
• Standard: ASTM, AISI, GB, DIN, GOST9941
• Certification: ISO
• Shape: Round
• Technique: Cold Rolled
• Surface Treatment: Ap/Ba/Polishing/Sand Blasting/Shot Blasting
• Outer Diameter: 1/8inch to 24inch
• Thickenss: Sch 10s ~ Schxxs
• Length: Rl or FL
• Test: Ht/Et/Ut
• Delivery Time: Stock 7 Days; Mto 30 Days
• Trade Terms: EXW, Fob, CFR, CIF etc.
• Markings: According to A999/A999m
• Transport Package: Packed in Bundles or Plywooden Box
• Specification: 254SMO
• Trademark: GH-STEEL
• Origin: China
• HS Code: 7304419000
• Production Capacity: 2000ton Per Month

Product Description

Product Description

Material to UNS S31254 (and the other specifications listed in our technical datasheet) is described as a 6% Mo super austenitic stainless steel.

Overview

The steel combines moderate mechanical strength (typically over 300 MPa yield strength) and high ductility with excellent corrosion resistance in seawater and a variety of industrial environments. Typically the alloy has a PREn (Pitting Resistance Equivalent) of 42-44 which ensures that the resistance to pitting corrosion is high. In addition, the steel provides good resistance to crevice corrosion. Ambient and sub-zero temperature notch ductility is very good. These attributes mean that this high molybdenum stainless steel can be used successfully as an alternative to 300 series austenitic stainless steels (such as type 316) in applications where higher mechanical strength and/or enhanced resistance to pitting and crevice corrosion is required.

Comparisons

This alloy possesses a lower yield strength than that of duplex stainless steel (and much lower than that of super duplex steel) and pitting resistance which is comparable to super duplex stainless steel (such as UNS S32760 / S32750).

 

Product Parameters

ASTM A213 A312 S31254 254SMO  Stainless Steel Tubes Pipes Chemical Composition

Grade	C max	Mn max	P max	S max	Si max	Cr	Ni	Mo	N
S31254 / 254SMO	0.020	1.00	0.030	0.01	0.08	19.50-20.50	17.50-18.50	6.0-6.5	0.18-0.22

ASTM A213 A312 S31254 254SMO  Stainless Steel Tubes Pipes Mechanical Properties

Grade	Status	Tensile Strength		Yield Strength		Elongation in 2 in. (min.) %
		MPa	ksi	MPa	ksi
S31254	T≤0.187in. (5mm)	675	98	310	45	35
S31254	T≤0.187in. (5mm)	655	95	310	45	35

ASTM A213 A312 S31254 254SMO  Stainless Steel Tubes Pipes Physical Properties

Density (kg/cm3)	Melting point	Specific Heat 0-100°C ( J/kg.K)	Thermal Conductivity at 20°C Btu/h ft ºF	Elastic Modulus (GPa)	Electrical resistivity [μΩ . cm]	Poissons Ratio	Shear Modulus
8 g/cm3 0.289 lb/in3	1320-1390°C	500 J.kg-1.°K-1	14 W/mK  97.2 BTU in/hr.ft².°F	195 Gpa 28300 Ksi	8.5 μohm/cm	0.3	75 Gpa 10900 Ksi

ASTM A213 A312 S31254 254SMO  Stainless Steel Tubes Pipes Equivalent Grade

Grade	UNS No	WERKSTOFF NR.	EN	US
254SMO	S3125	1.4547	X1CrNiMoN20-18-7	ASTM A479/A473, /A240 S31254 F44

AMERICAN STANDARD DIMENSION COPARISON TABL

Norminal Pipe Size	Outside Diameter	Wall Thicknesses Schedule ANSI/ASME B36.10M,B36.19M
DN(in.)	D	sch5s	sch10s	sch10	sch20	sch30	sch40s	STD	sch40	sch60	sch80s	XS	sch80	sch100	sch120	sch140	sch160	XXS
1/8	10.3	---	1.24	---	---	---	1.73	1.73	1.73	---	2.41	2.41	2.41	---	---	---	---	---
1/4	13.7	---	1.65	---	---	---	2.24	2.24	2.24	---	3.02	3.02	3.02	---	---	---	---	---
3/8	17.1	---	1.65	---	---	---	2.31	2.31	2.31	---	3.2	3.2	3.2	---	---	---	---	---
1/2	21.3	1.65	2.11	---	---	---	2.77	2.77	2.77	---	3.73	3.73	3.73	---	---	---	4.78	7.47
3/4	26.7	1.65	2.11	---	---	---	2.87	2.87	2.87	---	3.91	3.91	3.91	---	---	---	5.56	7.82
1	33.4	1.65	2.77	---	---	---	3.38	3.38	3.38	---	4.55	4.55	4.55	---	---	---	6.35	9.09
1¼	42.2	1.65	2.77	---	---	---	3.56	3.56	3.56	---	4.85	4.85	4.85	---	---	---	6.35	9.7
1½	48.3	1.65	2.77	---	---	---	3.68	3.68	3.68	---	5.08	5.08	5.08	---	---	---	7.14	10.15
2	60.3	1.65	2.77	---	---	---	3.91	3.91	3.91	---	5.54	5.54	5.54	---	---	---	8.74	11.07
2½	73	2.11	3.05	---	---	---	5.16	5.16	5.16	---	7.01	7.01	7.01	---	---	---	9.53	14.02
3	88.9	2.11	3.05	---	---	---	5.49	5.49	5.49	---	7.62	7.62	7.62	---	---	---	11.13	15.24
3½	101.6	2.11	3.05	---	---	---	5.74	5.74	5.74	---	8.08	8.08	8.08	---	---	---	---	---
4	114.3	2.11	3.05	---	---	---	6.02	6.02	6.02	---	8.56	8.56	8.56	---	11.13	---	13.49	17.12
5	141.3	2.77	3.4	---	---	---	6.55	6.55	6.55	---	9.53	9.53	9.53	---	12.7	---	15.88	19.05
6	168.3	2.77	3.4	---	---	---	7.11	7.11	7.11	---	10.97	10.97	10.97	---	14.27	---	18.26	21.95
8	219.1	2.77	3.76	---		7.04	8.18	8.18	8.18	10.31	12.7	12.7	12.7	15.09	18.26	20.62	23.01	22.23
10	273.1	3.4	4.19	---	6.35	7.8	9.27	9.27	9.27	12.7	12.7	12.7	15.09	18.26	25.4	28.58	25.4
12	323.9	3.96	4.57	---	6.35	8.38	9.53	9.53	10.31	14.27	12.7	12.7	17.48	21.44	25.4	28.58	33.32	25.4
14	355.6	3.96	4.78	6.35	7.92	9.53	---	9.53	11.13	15.09	---	12.7	19.05	23.83	27.79	31.75	35.71
16	406.4	4.19	4.78	6.35	7.92	9.53	---	9.53	12.7	16.66	---	12.7	21.44	26.19	30.96	36.53	40.49
18	457.2	4.19	4.78	6.35	7.92	11.13	---	9.53	14.27	19.05	---	12.7	23.83	29.36	34.93	39.67	45.24
20	508	4.78	5.54	6.35	9.53	12.7	---	9.53	15.09	20.62	---	12.7	26.19	32.54	38.1	44.45	50.01
22	558.8	4.78	5.54	6.35	9.53	12.7	---	9.53	---	22.23	---	12.7	28.58	34.93	41.28	47.63	53.98
24	609.6	5.54	6.35	6.35	9.53	14.27	---	9.53	17.48	24.61	---	12.7	30.96	38.89	46.02	52.37	59.54
26	660.4	---	---	7.92	12.7	---	---	9.53	---	---	---	12.7
28	711.2	---	---	7.92	12.7	15.88	---	9.53	---	---	---	12.7
30	762	6.35	7.92	7.92	12.7	15.88	---	9.53	---	---	---	12.7
32	812.8	---	---	7.92	12.7	15.88	17.48	9.53	17.48	---	---	12.7
34	863.6	---	---	7.92	12.7	15.88	17.48	9.53	17.48	---	---	12.7
36	914.4	---	---	7.92	12.7	15.88	19.05	9.53	19.05	---	---	12.7
38	965.2	---	---	---	---	---	---	9.53	---	---	---	12.7	Note: sch5s,10s,40s,80s Used for steel pipe fittings
40	1016	---	---	---	---	---	---	9.53	---	---	---	12.7
42	1066.8	---	---	---	---	---	---	9.53	---	---	---	12.7
44	1117.6	---	---	---	---	---	---	9.53	---	---	---	12.7
46	1168.4	---	---	---	---	---	---	9.53	---	---	---	12.7
48	1219.2	---	---	---	---	---	---	9.53	---	---	---	12.7

Summary	Standards
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes	ASTM A213
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes	ASTM A249
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	ASTM A269
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	ASTM A312
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications	ASTM A409
Standard Specification For Seamless Stainless Steel Mechanical Tubing	ASTM A511
Standard Specification For Seamless Stainless Steel Tubes,cold and hot finished	GOST9941-81

Standard	Outside Diameter Tolerance(mm)		Thickness Tolerance(mm)		Length Tolerance (mm)
ASTM A269	D<12.7	±0.13	±15%		+3.2 / -0
	(12.7~38.1]	±0.13	±10%
	[38.1~88.9)	±0.25			+4.8 / -0
	[88.9~139.7)	±0.38
	[139.7~203.2)	±0.76
ASTM A213	D<25.4	±0.1	D≤38.1	+20%/ -0%	D≤50.80	+3 / -0
	[25.4~38.1]	±0.15
	(38.1~50.8)	±0.2	D>38.1	+22%/ -0%	D>50.8	+5 / -0
	[50.8~63.5)	±0.25
	[63.5~76.2)	±0.30
	[76.2~101.6]	±0.38
	(101.6~190.5]	+0.38  / -0.64
	(190.5~228.6]	+0.38  / -1.14
ASTM A312	[10.29~48.26]	+0.4  / -0.8	10.3~73	+20% / -12.5%	+6 / -0
			88.9~457 T/D≤5%	+22.5% / -12.5%
	(48.26~114.30]	±0.80	88.9~457 T/D>5%	+15% / -12.5%
	(114.30~219.08]	+1.6  / -0.8	508above T/D<5%	+22.5% /-12.5%
	(219.08~457.20]	+2.4  / -0.8	508above T/D>5%	+15%/-12.5%
ASTM A789	D<12.7	±0.13	±15%		+3 / -0
	[12.7 to 38.1)	±0.13	±10%
	[38.1 to 88.9)	±0.25			+5 / -0
	[88.9 to 139.7)	±0.38
	[139.7 to 203.2)	±0.76
ГОСТ 9941-81	[5~10]	Normal:±0.30 High:±0.20     Higher:±0.15	T:0.2	Normal:±0.05mm; High:±0.03mm	/
			T:0.3~0.4	Normal:±0.07mm; High:±0.05mm
			T:0.5~1.0	Normal:±0.15mm; High:±0.10mm
	[11~30]	Normal:±0.40 High:±0.30     Higher:±0.20	T:1.2~3.0	Normal:+12.5% / -15%; High:±12.5%; Higher:+12.5% / -10%
			T:3.5~7.0	Normal:±12.5%; High:+12.5% / -10%; Higher:±10%
	[32~95]	Normal:±1.2% High:±1% Higher:±0.8%	T:7.5~8.5	Normal:+12.5% / -10%; Higher:±10%

Packaging & Shipping

1. All of our stainless steel seamless pipe & tubes are packaged as per international standard to prevent any possible damage or loss. By default, we will use thick woven plastic bag to bundle the finished pipes together in batches.
2. For some special pipes & tubes that are vulnerable to dirt, scratches, stress or rough handling, we will suggest wooden case for protection. Kindly note, wooden case can incur extra cost, not only its own cost, but also the increased freight cost, which is especially true for air transportation.
3. For enhanced customer experience, we also provide dedicated package as per your special requirements.

Certifications

The inspection of our company and products is open to customers themselves or their designated third-party inspectors, such as SGS, BV, TUV, DNV, etc., who are well-known in the industry.

PRODUCT APPLICATION

• Seawater handling equipment; heat exchanger, cooling water pipes
• Pulp mill bleach systems; drums, vats and press rolls.
• Tall oil distillation columns and equipment
• Chemical processing equipment
• Food processing equipment
• Desalination equipment
• Flue gas desulphurization scrubbers
• Oil and gas production equipment
• Tanks and pipelines for various chemicals with high halide levels

Company Profile

Wenzhou Guohao Steel was established in 2008. We are ISO 9001:2015 approved manufacturer, having a state-of-the-art infrastructure facility for having smooth production process. It has successfully grown by focusing on serving customers across a range of high technology industries. One of our company strengths is its people, with many colleagues having been with the company from the beginning. This provides our customers with the benefit of a wealth of experience and industry knowledge. Guohao Steel now has the whole of manufactured stainless steel products to add to its already large range of High Performance Nickel Alloys.
Guohao Steel adhere to the high standards of integrity and compliance required, including:

1. Environmental standards
2. Health and safety standards
3. Ethical trading standards
4. Export compliance requirements

We now stock and have direct access to a wide range of other materials, including stainless steels and nickel alloys. We supply and process pipes for numerous key industry sectors, collaborating with both small businesses and large international manufacturers across various countries. Due to our reputation for quality, reliability, and industry approvals, we are a well-regarded supplier in diverse sectors. Our delivery of long-term tangible benefits enables our customers to compete in today's challenging global marketplace.
In order to achieve our goals, we are improving our facilities and expanding our machinery to offer broader processing capabilities. Additionally, our investment extends to the growth and development of our teams, which represent our most valuable resource. We aim for our customers to receive the best experience and trust in the expertise, knowledge, and experience of our teams. As we continue looking towards the future, we rely on our core values to guide both decisions and actions.

Our Advantages

1. More than 16 Years of Experience in Stainless Steel Production.
2. Provides cost-effective products and professional services to you.
3. We offer an extensive range of stainless steel, super duplex steel,nickel alloy.

FAQ

1.Q: Do you provide customized product services?
A: Of course, we can design and produce the products you need based on your specifications and drawings. For example: special dimensions, special controls, OEM, etc.

2.Q: Are you a manufacturer or trader?
A: We are manufacturers. We have our own factory to produce and process various kinds of stainless steel /nickel alloy pipes.

3.Q: Can we get the some samples?Is there a charge?
A: Yes, we will provide you with the samples you want. The samples are free of charge, but the customer may have to pay the freight.

4.Q: Can we visit your factory?
A: Of course, we welcome you to visit our factory on-site or visit our production line through online videos to learn more about our strength and quality. Once we have your schedule, we will arrange a professional sales team to follow up with you.

5.Q: How do you ensure the quality of the product?
A: All products must undergo three inspections throughout the entire manufacturing process, including production, cutting, and packaging. The factory inspection report is provided with the goods. If necessary, third-party inspections such as SGS can be accepted.

6.Q: What is your delivery time?
A: Different products and procurement quantities have different delivery times. The product will be delivered as soon as possible on the basis of quality assurance. Usually, if the goods are in stock, it takes 3-10 days. Alternatively, if the goods are out of stock, it will take 25 to 45 days.

7.Q: Can you arrange shipment?
A: Of course, we have freight forwarders who have been cooperating for many years. We are VIP and can provide you with the most favorable prices and professional services.

8.Q: What if I don't have import experience?
A: We have rich export experience. As long as you have an import license, please leave the rest to us! We will help you choose the most suitable transportation service to safely and accurately deliver the product to the place where it is needed.