ASTM B163 ASME Sb163 Alloy 800ht Nickel Alloys Seamless Tubes Condenser Tubes

• Customization: Available
• Application: Aviation, Electronics, Industrial, Medical, Chemical
• Standard: JIS, GB, DIN, BS, ASTM, AISI
• Model NO.: 800HT
• Purity: 30~35%
• Alloy: Alloy
• Type: Nickel Pipe
• Powder: Not Powder
• Technique: Cold Drawn
• Surface Treatment: Annealed Pickled, Bright Annealed
• Section Shape: Round/Hollow
• Transport Package: Bundles/Wooden Box
• Specification: 800H
• Trademark: GH-STEEL
• Origin: China
• HS Code: 7507120000
• Production Capacity: 1000ton Per Month

Product Description

The grade 800 is efficiently used below 590°C. For usage above 590°C, alloy 800H and alloy 800HT are used. These grades show exceptional creep resistance properties without failing even after long exposure to high temperature. These grades are also used in the sigma phase temperature range since they effectively resist embrittlement due to their composition and the titanium content stabilizes the carbides. The presence of aluminium in grade 800HT might be used to form intermetallic compounds during precipitation, this would subsequently increase the strength of the metal. Aluminium also helps in improving oxidation resistance.
 

1. Material	Steel Grade	INCONEL: 600(N06600),601( N06601), 625( N06625),718(N07718),X-750(N07750) INCOLOY: 800(N08800), 800H(N08810),800HT(N08811),825(N08825),926(N08926), A-286(S66286),20(N08020),200(N02200),201(N02201)  HASTELLOY: C-22(N06022),C276(N10276),B-2(N10665) Monel : 400(N04400),K-500(N05500) High Temperature Alloy: GH3030,GH3039,Cr20Ni80
	Production Process	Available in cold rolled and cold drawn
	Standard	ASTM B163, B167, B168,  B407, B423, B444, B622, B677, B829
2. Diameter of Stainless Pipe	W.T	1mm-10mm
	Diameter	20mm thru 219mm
	Length	2m-12m, or customer required
4. Application	Nuclear Reactors Aerospace Industries Chemical Processing Heat Exchangers Petrochemicals Gas Processing Power Generation Pollution Control Marine Industries
5. Packing	*All of our nickel alloy seamless pipes and tubes are packaged according to international standards to prevent any possible damage or loss. By default, we will use thick woven plastic bags to bundle the finished pipes together in batches. For some special pipes and tubes that are vulnerable to dirt, scratches, stress, or rough handling, we will suggest using wooden cases for protection. Please note that wooden cases may incur extra costs not only for the case itself but also for increased freight costs, especially when using air transportation. To enhance customer experience, we also provide dedicated packaging according to your specific requirements."
6. Delivery Time	1.for ready stock :7 days after receiving the deposit of T/T 2.For MTO: 35 days after receiving the  deposit of T/T
7. Trade Terms	EXW,FOB, CFR, CIF etc.
8. Payment Terms	1.30%T/T in advance, the balance against the B/L copy 2.30%T/T in advance, the balance against the L/C at sight
9. Loading Port	Ningbo/Wenzhou/Shanghai

EQUIVALENT GRADES FOR INCOLOY 800 800H 800HT SEAMLESS PIPES

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN	OR
Incoloy 800	1.4876	N08800	NCF 800	NA 15	ЭИ670	Z8NC32-21	X10NiCrAlTi32-20	XH32T
Incoloy 800H	1.4958 / 1.4876	N08810	NCF 800H	NA 15(H)	ЭИ670	Z8NC33-21	X5NiCrAlTi31-20	XH32T
Incoloy 800HT	1.4859 / 1.4876	N08811	NCF 800HT	NA 15(HT)	ЭИ670	-	X8NiCrAlTi32-21	XH32T

CHEMICAL COMPOSITION FOR INCOLOY 800 800H 800HT SEAMLESS PIPES

Grade		Ni	C	Cr	Mn	Si	Cu	Al	S	Fe	Ti
Incoloy 800	Min.	30	-	19	-	-	-	0.15	-	39.5	0.15
	Max.	35	0.1	23	1.5	1	0.75	0.6	0.015	-	0.60
Incoloy 800H	Min.	30	0.5	19	-	-	-	0.15	-	39.5	0.15
	Max.	35	0.1	23	1.5	1	0.75	0.6	0.015	-	0.60
Incoloy 800HT	Min.	30	0.6	19	-	-	-	0.15	-	39.5	0.15
	Max.	35	0.1	23	1.5	1	0.75	0.6	0.015	-	0.60

 

MECHANICAL PROPERTIES FOR INCOLOY 800 800H 800HT SEAMLESS PIPES

Grade	Condition	Yield Strength, (0.2% offset), min, psi (MPa)	Tensile Strength, min, psi (MPa)	Elongation in 2 inches or 50 mm (or 4D), min%
Incoloy 800 (UNS N08800)	Cold-worked annealed	30 000 (205)	75 000 (520)	30
Incoloy 800 (UNS N08800)	Hot-finished annealed or hot-finished	25 000 (170)	65 000 (450)	30
Incoloy 800H (UNS N08810)	Hot-finished annealed or cold-worked annealed	25 000 (170)	65 000 (450)	30
Incoloy 800HT (UNS N08810)	Hot-finished annealed or cold-worked annealed	25 000 (170)	65 000 (450)	30

ASTM B407 STANDARD DIMENSION AND PERMISSIBLE

Permissible Variation
Specified or Calculated Nominal Outside Diameter	Outside Diameter or Inside Diameter		Wall Thickness,%
	+	-	+	-
Cold -Finished Pipes and Tubes, (Inches)
0.500 to 5⁄8, excl	0.005	0.005	15	15
5⁄8 to 11⁄2, incl	0.0075	0.0075	10	10
Over 1 1⁄2 to 3 1⁄2, incl	0.01	0.01	10	10
Over 3 1⁄2 to 4 1⁄2, incl	0.015	0.015	10	10
Over 4 1⁄2 to 6, incl	0.02	0.02	12.5	12.5
Over 6 to 6 5⁄8, incl	0.025	0.025	12.5	12.5
Millimeters
12.7 to 15.8, excl	0.127	0.127	15	15
15.8 to 38.1, incl	0.19	0.19	10	10
Over 38.1 to 88.9, incl	0.254	0.254	10	10
Over 88.9 to 114.3, incl	0.381	0.381	10	10
Over 114.3 to 152.4, incl	0.508	0.508	12.5	12.5
Over 152.4 to 168.3, incl	0.635	0.635	12.5	12.5
Hot-Finished Tube, (Inches)
2 1⁄2 to 5 1⁄2, excl	0.031	0.031	12.5	12.5
5 1⁄2 to 9 1⁄4, incl	0.047	0.047	12.5	12.5
Millimeters
63.5 to 139.7, excl	0.787	0.787	12.5	12.5
139.7 to 234.9, incl	1.19	1.19	12.5	12.5

Packaging & Shipping 

Application

• Sulphuric acid piping and vessels
• Phosphoric acid evaporators
• Pickling tank heaters, pickling tanks and equipment
• Chemical process equipment
• Propellor shafts
• Tank trucks
• Calorifiers
• Electrostatic precipitator electrodes
• Hot vessels for food, water and seawater,
• ammonium sulphate vessels
• Expansion bellows
• Marine exhaust systems
• Power station ash hoppers
• Ethylene furnace quench boilersHydrocarbon cracking Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
• Industrial furnaces
• Heat-treating equipment
• Chemical and petrochemical processing
• Super-heater and re-heaters in power plants
• Pressure vessels
• Heat exchanger

Positive Material Identification (PMI)	Guohao Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications.
Testing	In some cases, HT/ET/UT testing of the stainless steel pipes may be required. We can assist you with this requirement.

 

 Q1:How many countries you already exported ?
A1:Exported to more than 30 countries mainly from America, Russia, Ukraine, Vietnam, Egypt, Iran, Turkey, Mexico etc.
Q2:How can I get some samples?
A2:Small samples in store and can provide the samples for free. Catalogue is available, most patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q3:Do you have any MOQ limit for stainless steel products order? 
A3: MOQ, 1pc for ready stock of stainless steel seamless pipe. MOQ :1 tons for MTO.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. For mass products, ship freight is preferred.
Q5:How does your company do regarding quality control?
A5:Mill Test Certificate is supplied with shipment. If needed, a Third Party Inspection is acceptable or SGS.
Q6: Is it OK to print my logo on products??
A7: Yes. OEM and ODM are available for us.